iQuip Liftoff 5 Acrylic Latex Paint Remover
$32.95
The patented formula of Lift Off® Latex Paint Remover breaks the Molecular Bond™ for fast, easy removal of latex paint and latex enamel from walls, trim, molding, floors, wood, vinyl, tile, laminate, metal, brick, concrete, and vehicles.
Lift Off® will not melt or dissolve paint, leaving paint solid and intact for safe and easy clean-up and disposal. It has a water-based, biodegradable formula with low VOC content.
Use caution on painted, colored, or treated concrete and other surfaces. Lift Off® may remove these.
How to Use - Hard Surfaces
- Test in an inconspicuous area to ensure surface integrity and compatibility.
- Spray area and wait at least 60 seconds.
- Agitate with a soft brush if necessary.
- Wipe with a clean white cloth or rinse clean if possible. Repeat if necessary.
How to Use - Porous Surfaces
- Test in an inconspicuous area to ensure surface integrity and compatibility.
- Spray area and wait at least 3 minutes.
- Agitate with a soft brush if necessary.
- For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top. Repeat if necessary.
How to Use - Vehicles
- Test on an inconspicuous area.
- Spray directly onto area with graffiti or paint transfer.
- Wipe immediately with clean, white cloth.
- Do not allow Lift Off® to remain on vehicle for more than 5-10 seconds at a time.
- Completely wash Lift Off® from vehicle after treatment. Repeat if necessary.
- Avoid applying Lift Off® to vehicles in direct sunlight.
Ask a question
Got a question?
Enter your question below and we will get back to you as soon as possible.
See our related
Products
Check out a few other products that we think you may be interested in.
customer
Testimonials
Just done a trial run with Prolon rollers on the sealing as well - on the walls I find they hold a lot more paint and spread rate is at least 20% more and the finish is nearly unbelievable with how flat it can actually go. I'll be buying them from now on.
Andrew - Coventry Coatings
We use the abrasive sponges on our decorative woodwork, cornice finishes - right into the tight spots that your general sandpaper cant get into. We save hours per job and the quality it sands up is perfect.
Rhys - Jennings Painting & Decorating
Vast variety of products, delivery is very fast and efficient.
Josh - Flowtech Painting & Restoration Services
Been using TradeGear for 3 months and couldn't ask for a better service. The range of abrasive, tape, plastic and sleeves has helped.
Ryan
The pre-taped masking film is really good quality and good price. Delivery is excellent so we don't have to leave site to go out to the paint shop.
Nick - Nick Butterworth Painting