$35.99
Regular price $28.60Get ultimate hiding power indoors and out with Rust-Oleum® Zinsser® Cover-Stain® Oil-Base Primer. This whole-house primer-sealer is a favourite with professionals and is Zinsser's best exterior wood sealer.
Use it to block stains, hide dark colours, prevent tannin bleed and penetrate and seal exterior timber.
Features:
- Tintable to most pastel, mid-tone and deep-tone shades
- Interior and exterior use
- Sticks to all surfaces without sanding
- Seals water, smoke and nicotine stains
- Blocks cedar and redwood bleed
- Touch dry in 35mins
- Re-coatable in 2hrs
Coverage:
- 3.78L - 30m2
Recommended surfaces
- New or previously painted interiors
- Panelling and wood trim
- Glossing paints
- Clear finishes
- Formica
- Exterior priming on shutters, soffits, doors, and windows
Application
Aerosol:
- Shake can until ball rattles, and then for 1min longer
- Repeat shaking periodically during use
- Spray 25-30cm from surface in short 'dusting' strokes. Always test spray pattern before using
- Use in well-ventilated area
- If valve clogs, twist to remove and rinse in mineral turps
Tin:
- Shake or stir well before use
- Apply with natural or synthetic bristle brush, roller or pad
- Can be sprayed
Clean-up: Mineral turps
Minimum temperature for use: 5°
Documents
CoverStain Technical Data Sheet
Get ultimate hiding power indoors and out with Rust-Oleum® Zinsser® Cover-Stain® Oil-Base Primer. This whole-house primer-sealer is a favourite with professionals and is Zinsser's best exterior wood sealer.
Use it to block stains, hide dark colours, prevent tannin bleed and penetrate and seal exterior timber.
Features:
- Tintable to most pastel, mid-tone and deep-tone shades
- Interior and exterior use
- Sticks to all surfaces without sanding
- Seals water, smoke and nicotine stains
- Blocks cedar and redwood bleed
- Touch dry in 35mins
- Re-coatable in 2hrs
Coverage:
- 3.78L - 30m2
Recommended surfaces
- New or previously painted interiors
- Panelling and wood trim
- Glossing paints
- Clear finishes
- Formica
- Exterior priming on shutters, soffits, doors, and windows
Application
Aerosol:
- Shake can until ball rattles, and then for 1min longer
- Repeat shaking periodically during use
- Spray 25-30cm from surface in short 'dusting' strokes. Always test spray pattern before using
- Use in well-ventilated area
- If valve clogs, twist to remove and rinse in mineral turps
Tin:
- Shake or stir well before use
- Apply with natural or synthetic bristle brush, roller or pad
- Can be sprayed
Clean-up: Mineral turps
Minimum temperature for use: 5°
Documents
CoverStain Technical Data Sheet