iQuip Liftoff 5 Acrylic Latex Paint Remover

The patented formula of Lift Off® Latex Paint Remover breaks the Molecular Bond™ for fast, easy removal of latex paint and latex enamel from walls, trim, molding, floors, wood, vinyl, tile, laminate, metal, brick, concrete, and vehicles.

Lift Off® will not melt or dissolve paint, leaving paint solid and intact for safe and easy clean-up and disposal. It has a water-based, biodegradable formula with low VOC content.

Use caution on painted, colored, or treated concrete and other surfaces. Lift Off® may remove these.

How to Use - Hard Surfaces

1. Test in an inconspicuous area to ensure surface integrity and compatibility.
2. Spray area and wait at least 60 seconds.
3. Agitate with a soft brush if necessary.
4. Wipe with a clean white cloth or rinse clean if possible. Repeat if necessary.
   

How to Use - Porous Surfaces

1. Test in an inconspicuous area to ensure surface integrity and compatibility.
2. Spray area and wait at least 3 minutes.
3. Agitate with a soft brush if necessary.
4. For best results remove paint with a high pressure water system set at 1200 psi or greater working from bottom to top. Repeat if necessary.
   

How to Use - Vehicles

1. Test on an inconspicuous area.
2. Spray directly onto area with graffiti or paint transfer.
3. Wipe immediately with clean, white cloth.
4. Do not allow Lift Off® to remain on vehicle for more than 5-10 seconds at a time.
5. Completely wash Lift Off® from vehicle after treatment. Repeat if necessary.
6. Avoid applying Lift Off® to vehicles in direct sunlight.