Sundstrom SR100 Half Silicon Mask

Half mask with excellent fit, high protection level and very good breathing comfort for use in the toughest work environments.

Ideal for protection against dust, solvents and acid gases.

Note - filter not included, this must be purchased separately. See link in Compatible Filters.

Features

• The SR 100 half mask is made of silicone in three sizes, i.e. S/M, M/L and L/XL. Soft on your skin with a good fit.
• The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The special valve caps stop spray paint from clogging them up, so you can keep working without a hitch.
• The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and provide a comfortable and safe fit.
• The Compressed air attachment SR 307 can be connected. A pre-filter holder and test disc for simple checking of the performance are supplied. Best stored in protective box.

Technical Specifications

• Inhalation resistance at 30 l/min ≈ 3 Pa ≤ 50 Pa
  
• Exhalation resistance at 160 l/min ≈ 70 Pa ≤ 300 Pa
  
• Service temperature -10 – +55 °C, < 90 % RH
  
• Storage temperature -20 – +40 °C, < 90 % RH
  
• Weight ≈ 179 g
  
• Assigned Protection Factor¹ 20 (P3), 10 (GasX), 10 (GasX P3)
  
• Nominal Protection Factor2 48 (P3), 50 (GasX), 48 (GasX P3)

Compatible Filters

P3 Filter - Used against all types of wet and dry particles, such as dust, smoke, aerosols, spray, asbestos, bacteria, viruses and mould.  It removes 99.997% of all particles from the air you breathe. Other particle filters with lower filters can not filter out particles to the same extent as your P3 filter.

ABE1 Filter - Used against vapour from organic gases whose boiling point exceeds +65°C (150F), for inorganic gas, and for acid gas and vapour. The filter has regular (class 1) capacity.